Fisher And Paykel Washing Machine Control Panel Not Working
Fisher And Paykel Washing Machine Control Panel Not Working. The washer has detected a fault. Rotate to select your desired wash cycle.
Then, unplug the unit’s electrical cord from the outlet and wait at least 30 seconds. I’m going to see if it works when i put the bottom control box into the top and see if it works. An open circuit reflects a bad switch.
Also Includes New Inline Fuse For Board Protection.
When looking for parts for your fisher & paykel washing machine you must use the product code (not the model number). Washer door not closed properly. Fisher and paykel dishwasher dd60dcx6 top drawer door sensor not working, any tips?
Repaginated (Simplified Page Numbers) And Alterations To Sections 12 And 13.7 March 2003:
Fisher & paykel dishwashers are available in single and double units and a variety of sizes and finishes. My fisher paykel gwl11 top load washer will not start. Kit includes metal control panel (not pictured).
Before You Continue, Make Sure That The Machine Is Not In The Middle Of A Wash Cycle.
If it is a normal washsmart top load washing machine it should be simple as selecting the cold setting on panel. How to reset a smart drive fisher & paykel 608 go to the electrical outlet that you have your fisher & paykel smart drive washer plugged into. Then undo the screws on the control panel and it should separate from the machine.
Most Likely, There Is Poor Connection Between The Rotor Position Sensor And Motor Control Module.
Touching does not start the fill. This code signals a problem detected by the rotor position sensor. I pushed start/pause button and it restarted.
Please Select Your Product Code From The List Below.
Plug the electrical cord back into the wall and turn the smart drive back on. Fisher & paykel dishwashers are available in single and double units and a variety of sizes and finishes. F & p 8kg washsmart wh8060p2.
Post a Comment for "Fisher And Paykel Washing Machine Control Panel Not Working"